Structure and properties of Cr–C/Ag films deposited by magnetron sputtering [Elektronisk resurs]
-
Folkenant, M. (författare)
-
Nygren, K. (författare)
-
Malinovskis, Paulius (författare)
-
Palisaitis, Justinas (författare)
-
Persson, Per O.Å . (författare)
-
Lewin, E. (författare)
-
Jansson, U. (författare)
-
- Linköpings universitet Institutionen för fysik, kemi och biologi (utgivare)
-
-
Alternativt namn: Linköpings universitet. Institutionen för fysik och mätteknik
(tidigare namn)
-
Alternativt namn: Linköpings universitet. Institutionen för fysik och mätteknik, biologi och kemi
(tidigare namn)
-
Alternativt namn: IFM
-
Alternativt namn: Engelska : Department of Physics and Measurement Technology, Biology and Chemistry
-
Alternativt namn: Engelska : Department of Physics, Chemistry and Biology
-
- Linköpings universitet Tekniska högskolan (utgivare)
-
-
Alternativt namn: Linköpings universitet. Tekniska fakulteten
-
Alternativt namn: Linköpings tekniska högskola
-
Alternativt namn: Tekniska högskolan vid Linköpings universtiet
-
Alternativt namn: LiTH
-
Alternativt namn: Linköping University. Institute of Technology
-
Se även: Universitet i Linköping Tekniska högskolan
-
Linköpings universitet Tekniska fakulteten (utgivare)
-
Impact Coatings AB (medarbetare)
- Elsevier 2015
- Engelska.
-
Ingår i: Surface & Coatings Technology. - 0257-8972. ; 281, 184-192
-
Läs hela texten
-
Läs hela texten
-
Läs hela texten
Sammanfattning
Ämnesord
Stäng
- Cr–C/Ag thin films with 0–14 at.% Ag have been deposited by magnetron sputtering from elemental targets. The samples were analyzed by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) to study their structure and chemical bonding. A complex nanocomposite structure consisting of three phases; nanocrystalline Ag, amorphous CrC x and amorphous carbon is reported. The carbon content in the amorphous carbide phase was determined to be 32–33 at.% C, independent of Ag content. Furthermore, SEM and XPS results showed higher amounts of Ag on the surface compared to the bulk. The hardness and Young's modulus were reduced from 12 to 8 GPa and from 270 to 170 GPa, respectively, with increasing Ag content. The contact resistance was found to decrease with Ag addition, with the most Ag rich sample approaching the values of an Ag reference sample. Initial tribological tests gave friction coefficients in the range of 0.3 to 0.5, with no clear trends. Annealing tests show that the material is stable after annealing at 500 °C for 1 h, but not after annealing at 800 °C for 1 h. In combination, these results suggest that sputtered Cr–C/Ag films could be potentially applicable for electric contact applications.
Ämnesord
- Natural Sciences (hsv)
- Physical Sciences (hsv)
- Condensed Matter Physics (hsv)
- Naturvetenskap (hsv)
- Fysik (hsv)
- Den kondenserade materiens fysik (hsv)
Indexterm och SAB-rubrik
- Amorphous; Chromium carbide; Silver; Magnetron sputtering; Mechanical properties; Electrical properties
Inställningar
Hjälp
Beståndsinformation saknas